Arched Headboard and Footboard with built on bench made of cherry and panels made with curly yellow birch. This page list the procedures and setups used to make this headboard and foot board that incorporated a bench into the design. This allowed the footboard to become freestanding. Following are some photos taken during the process’ […]
This page attempts to show the process I took to carve deep relief carvings on both sides of a 15 3/4 inch wide by 37 1/4 inch long piece of basswood completed 1/10/2010. The carving was used as the upper panel for a custom made ash door for a half bath or washroom off the […]
Constructed with red oak and flame birch. The birch has been sanded and polish to a glass smooth finish. Brass button plugs were used as an accent. All of the vertical members below the top where steam bent. The intent was to create the illusion of some movement such as wheat in a breezy field […]
This project was designed and developed for the Erickson Center for the Arts located in Curtis Michigan. The tree was designed to hold four levels of donor nameplates. The wood used was flame birch. This type of wood was selected because of the figure which when positioned at certain angles resembles the groups of needles […]
All Content and Work Copyright © 2012-2021 Woodworks by Garry LLC. All Rights Reserved.
